Comply with the operating instructions Instructions for use and other useful information Dealing with recyclable materials Do not dispose of electric equipment and batteries as household waste Hilti Liion battery Hilti charger 1.2.3 Symbols in illustrations The following symbols are used in illustrations: These numbers refer to the illustrations at the beginning of these operating instructions.
Page 8
The following symbols can be used on the product: The power tool supports near-field communication (NFC) technology, which is compatible with iOS and Android platforms. Hilti Li-ion battery type series used. Observe the information given in the section headed In- tended use. Li-ion battery Never use the battery as a striking tool.
Page 9
▶ Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. Electrical safety ▶ Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.
Page 10
Battery tool use and care ▶ Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. ▶ Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
Page 11
§ Battery display Intended use The product described is a hand-held cordless drill designed for drilling blind holes in steel using Hilti TXBT… stepped drill bits which is a prerequisite for driving Hilti XBT threaded studs. • Use only Hilti lithiumion batteries of the B 22 series with this product.
If the battery display LEDs blink, please observe the instructions given in the Troubleshooting section. Items supplied Electric drill, operating instructions. Other system products approved for use with this product can be found at your local Hilti Store or at: www.hilti.group Technical data...
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work patterns. Noise emission values determined in accordance with EN 62841 SF BT 22A Emission sound pressure level (L 71 dB(A)
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by Hilti for use with the product can be found at your local Hilti Center or online at: www.hilti.com ▶...
See “Technical data” section. Manufacturer’s warranty ▶ Please contact your local Hilti representative if you have questions about the warranty conditions. 2127431 English *2127431*...
Need help?
Do you have a question about the SF BT 22--A and is the answer not in the manual?
Questions and answers