Casio EXILIM Exilim EX Z 100 User Manual page 90

1.
Use [8] and [2] to select the editing method you want to use and then
press [SET].
2.
Use the following operations to select the
frame (point) from which or to which you
want to cut the movie (the cut point).
Fast forward/fast reverse
Play/pause
One frame forward/back
3.
When the frame where you want the cut point to be is displayed, press
[2].
Cut
}
(To-Point Cut)
Cut
~
(Point-To-Point Cut)
Cut
¡
(From-Point Cut)
4.
Use [8] and [2] to select "Yes" and then press [SET].
The selected cut operation will take considerable time to complete. Don't try to
perform any camera operation until the "Busy... Please wait..." message
disappears from the monitor screen. Note that a cut operation can take a long
time if the movie being edited is long.
While the frame you want the cut to be up to is
displayed, press [2].
While the frame you want the first (From) cut to be is
1
displayed, press [2].
While the frame you want the second (To) cut to be
2
is displayed, press [2].
While the frame you want the cut to be from is
displayed, press [2].
90
[4] [6]
[SET]
[4] [6]
Cut range (red)
Other Playback Functions (PLAY)