To Load The Battery - Casio EXILIM Exilim EX Z 100 User Manual

To load the battery

1.
Open the battery cover.
Slide the battery cover slider towards OPEN and
then open it as indicated by the arrows in the
illustration.
2.
Load the battery.
With the EXILIM logo on the battery
facing upwards (in the direction of the
monitor screen), hold the stopper next to
the battery in the direction indicated by
the arrow as you slide the battery into the
camera. Press the battery in until the
stopper secures it in place.
3.
Close the battery cover.
Close the battery cover and then shift the slider
towards LOCK.
• For information about how to replace the battery,
see page 148.
Checking Remaining Battery Power
As battery power is consumed, a battery indicator on the monitor screen indicates
remaining power as shown below.
Remaining Power
Battery Indicator
Indicator Color
indicates battery power is low. Charge the battery as soon as possible.
Recording is not possible when
• The level shown by the battery indicator may change when you switch between the
REC mode and PLAY mode.
• Leaving the camera for about two days with no power supplied while the battery is
dead will cause its date and time settings to be cleared. You will have to re-
configure the settings after power is restored.
• See page 169 for information about battery life and memory capacity.
Battery Power Conservation Tips
• When you do not need to use the flash, select ? (flash off) for the flash setting
(page 26).
• Enable the Auto Power Off and the Sleep features to protect against wasting
battery power when you forget to turn off the camera (pages 133, 134).
High
*
Cyan * Amber
is indicated. Charge the battery immediately.
12
Stopper
Battery
Low
* *
Red
* *
1
2
2
1
Red
Quick Start Basics