Casio EXILIM Exilim EX Z 100 User Manual page 164

Printing Error
Record Error
RETRY POWER
ON
SYSTEM ERROR
The card is
locked.
There are no files. There are no files in built-in memory or on the memory card.
There are no
printing images.
Set up DPOF.
There is no image
to register.
This card is not
formatted.
This file cannot be
played.
This function
cannot be used.
An error occurred while printing.
• The printer is turned off.
• The printer generated an error, etc.
Image compression could not be performed for some reason
during image data storage. Shoot the image again.
The lens came into contact with an obstruction while moving.
The camera will turn off automatically when this message
appears. Remove the obstruction and turn power back on
again.
Your camera system is corrupted. Contact your retailer or an
authorized CASIO authorized service center.
The LOCK switch of the SD or SDHC memory
card loaded in the camera is in the locked
position. You cannot store images to or delete
images from a memory card that is locked.
There are currently no files specified for printing. Configure
the required DPOF settings (page 104).
The setup you are trying to save is for an image that cannot
be saved as a user BEST SHOT scene.
The memory card loaded in the camera is not formatted.
Format the memory card (page 136).
The file you are trying to access is corrupted or is a type that
cannot be displayed by this camera.
You attempted to copy images from built-in memory to a
memory card while there is no memory card loaded in the
camera (page 100).
164
LOCK
Appendix