Annotation Input - FujiFilm CR Operation Manual

CR Console Operation Manual
1

Annotation Input

This function allows to input an annotation on a read image. (Artifacts may appear around the
input annotation due to spatial frequency processing when the annotation-added image is
displayed or output on film by other devices.)
Select
has been displayed.)
To specify a position for annotation before inputting it, select any position on the target image.
The point for input will then be determined. To delete the point for input thus determined, re-
select it.
If no annotation position is specified, it will be input at the center of the image.
It is possible to change the annotation position after it has been input.
6
. (Note that appears already selected immediately after the annotation input box
010-204-00
Fuji Photo Film Co., Ltd.
2002. 12