Playing Back On A Tv Screen - Canon optura10 Instruction Manual

Playing Back on a TV Screen

You can connect the camcorder to a TV or VCR to play back your recordings on a TV
E
screen.
❍ Make sure that "H" is not displayed on the screen. If "H" is displayed, change
the setting (
❍ When you use the TV as a monitor during recording, keep the TV volume
turned down as long as the camcorder's audio terminals are connected. An
unpleasant high-pitched squeal, called feedback, may be produced if sound
from the TV speakers is picked up by the microphone.
❍ For high picture quality, we recommend using a TV with an S (S1) terminal.
❍ TVs with S1-terminal or Video ID-1 system: Recordings made in the 16:9 mode
( 50) will be automatically played back in wide screen mode.
TVs with S (S1)-Video Input Terminal
Refer also to the TV or VCR instruction manual.
1. Turn off all devices before starting the connections.
2. Connect the S-150 S-video Cable (optional) to the S-video terminals.
40
70).
S-150 S-video Cable (optional)
Signal flow
STV-250N Stereo Video Cable (supplied)
Signal flow
INPUT
S(S1)-VIDEO
VIDEO
AUDIO
L
R