Canon optura10 Instruction Manual page 108

❍ The setting resets to [SINGLE] when you turn the camcorder off.
❍ Maximum number of continuous shots at one time (at 16 MB or more
available capacity):
E
Still Image Size
1280 × 960
640 × 480
*These figures are approximate and vary with the recording conditions and subjects.
❍ If you attach the optional VFL-1 Video Flash Light, the practical range of the
flash in the Continuous Shooting mode is approx. 3.3 ft. (1 m) to 6.6 ft. (2 m).
Auto Exposure Bracketing
With Auto Exposure Bracketing (AEB), the camcorder records a still image in three
different exposures (dark, normal, light), allowing you to choose the perfect exposed shot.
CAMERA
CAMERA SET UP
( 43)
1. Set the camcorder to CARD CAMERA mode.
2. Open the menu and select [CAMERA SET UP]. Select [DRIVE MODE], set
it to [AEB
3. Press the PHOTO button.
Three still images in different exposures are recorded to the memory card.
The setting resets to [SINGLE] when you turn the camcorder off.
Recording from a Tape in the Camcorder
You can record images from a tape in the camcorder as still images on a memory card.
CAMERA
1. Set the camcorder to PLAY (VCR) mode.
2. Play back the tape.
3. Press the PHOTO button halfway when the scene you wish to record
appears.
• The camcorder pauses playback. The remaining image capacity and other information
appear.
• When you press the PHOTO button on the wireless controller, recording starts
immediately.
108
Optional VFL-1
Attached
Flash ON/OFF
Flash OFF
Flash ON
PLAY (VCR)
] and close the menu.
PLAY (VCR)
Frames per
Second
2 frames
3 frames
2 frames
CARD CAMERA
DRIVE MODE•••SINGLE
CARD CAMERA
Maximum Number
of Continuous Shots
10 images
30 images
10 images
CARD PLAY (VCR)
CARD PLAY (VCR)