Sending Fuel; Change Of Station; Starting Engine - Yamaha F350A Owner's Manual

Operation
ing the air vent screw.
This product emits exhaust gases

which contain carbon monoxide, a col-
orless, odorless gas which could cause
brain damage or death when inhaled.
Symptoms include nausea, dizziness,
and drowsiness. Keep cockpit and cab-
in areas well ventilated. Avoid blocking
exhaust outlets.
EMU31814

Sending fuel

1. If there is a fuel joint or a fuel valve on
the boat, firmly connect the fuel line to
the joint or open the fuel valve.
2. Squeeze the primer pump, with the ar-
row pointing up, until you feel it become
firm.
1. Arrow
EMU35751

Change of station

For dual station boats, the station selector
switch can select either the main station or
sub station for the operating seat.
Only the selected station can operate the
digital electronic control. The switch panel
can start and stop the engine at both sta-
tions, regardless of the selected station.
1. Set all control levers to Neutral.
2. Turn the main switch to "
3. Push the station selector switch to select
60
4.
EMU27495

Starting engine

EWM01601
Before starting the engine, make sure
that the boat is tightly moored and that
you can steer clear of any obstructions.
Be sure there are no swimmers in the wa-
ter near you.
EMU41791
Start-up checks
Place the control lever in neutral and turn the
main switch to "
alert-indicator comes on. If the buzzer
sounds and the water separator-alert indica-
tor blinks, consult your Yamaha dealer im-
mediately.
EMU42161
Procedure for single station models
EWM01841
Failure to attached engine shut-off cord

could result in a runaway boat if opera-
tor is ejected. Attach the engine shut-
off cord to a secure place on your cloth-
ing, or your arm or leg while operating.
Do not attach the cord to clothing that
" (on).
could tear loose. Do not route the cord
where it could become entangled, pre-
the station for operating the boat.
The digital electronic control-active indi-
cator for the selected station lights.
WARNING
" (on). Make sure that no
WARNING
ZMU07141