Location and Function of Parts
Rear
2 Cooling fans
1 SCSI connectors
3 AC IN connector
SCSI
SCSI
⁄AC IN
4 Ground terminal
1 SCSI connectors (68-pin)
Use the supplied SCSI cable to connect to the SCSI
connector of the hybrid recorder.
If the second of the two SCSI connectors is not
connected to another device, connect the SCSI
terminator supplied with the hybrid recorder. Fasten
the SCSI terminator securely with the screws.
2 Cooling fans
These prevent the interior of the unit from overheating.
3 AC IN connector (3-pin)
Connect to an AC supply.
4 Ground terminal
Connect this to the signal ground terminals of other
equipment, as required.
8(E)