Advertisement
Get Started
To get started, you will need :
• Maevi Gateway
• Maevi Gas Sensor
• Maevi Mobile App
(Available for download on Google Play Store and Apple App Store)
Then follow the steps below:
1. Plug the Gas detector to power outlet, the LED indicator will flash alternatively for
three minutes, indicating the sensor is warming up.
2. After the LED indicator become solid green, open Maevi App and go to "Home
Security" tab.
3. Select the "Sensor" tab.
4. Select the "Add New Device" button to pair the Gas Sensor with the Gateway.
Tips: You can also press and hold the "Z" button on the Gateway for two seconds until the LED indicator
turns steady blue.
4
Pairing Device
Button
Sensor Tab
Advertisement
