Advertisement
5. Select Gateway, now the Gateway will start searching for new devices to be paired
with.
6. The Gas Sensor will join the gateway's network automatically.
7. The LED light will be off and then light up in green when pairing is successful. The Gas
Sensor should now appear in the app as Gas Sensor. If not, refresh the "Home
Security" page by pull it down and release.
8. Click the Gas Sensor to see the individual info page.
9. Place the Gas Detector at your desired place. (Refer to Mounting Instructions)
Mounting Instruction
Before installation, please confirm whether the gas density is heavier or lighter than the air.
If the gas is heavier than the air, such as LPG, install at 0.3-1m height from the floor, less than
1.5m from the gas source.
If the gas is lighter than air, such as natural gas, manufactured gas, and marsh gas, install at
0.3 to 1m height from the ceiling, less than 1.5 m from the gas source.
Mounting Example
5
Advertisement
