Advertisement
Quick Links
Advertisement
Summary of Contents for Maevi ZigBee
- Page 1 Maevi Gas Sensor Quick Start Guide...
- Page 2 Maevi Gas Sensor uses an extra lower power consumption ZigBee wireless module. It is used for detecting combusting gas leakage. It can also be used as a ZigBee repeater that extends wireless transmission distance. The gas detector adopts a high stability semi-conductor gas sensor with little sensitivity drift.
- Page 3 LED Indicator LED Status Status Alarm Sound Green LED Normal LED flashes alternatively Device warming up Beep once when powered Red LED flashes Alarm Rapid beeps Yellow LED solid Fault...
-
Page 4: Get Started
1. Plug the Gas detector to power outlet, the LED indicator will flash alternatively for three minutes, indicating the sensor is warming up. 2. After the LED indicator become solid green, open Maevi App and go to “Home Security” tab. - Page 5 5. Select Gateway, now the Gateway will start searching for new devices to be paired with. 6. The Gas Sensor will join the gateway’s network automatically. 7. The LED light will be off and then light up in green when pairing is successful. The Gas Sensor should now appear in the app as Gas Sensor.
- Page 6 Features Notification ON/OFF Status Device Notification ON/OFF Device Status/ Info...
- Page 7 Edit Button To Remove Device Add To Favourite To Rename Device To Save Changes Info Page Activity Log History Page...
- Page 8 Reset Gas Sensor Steps: 1. Use a pin key tool to press and hold the reset button for five seconds until the LED indicator flashes green six times. 2. Now, Gas Sensor is returned to the default factory setting.