Advertisement
Get Started
To get started, you will need :
• Maevi Gateway
• Maevi Smart Plug
• Maevi Mobile App
(Available for download on Google Play Store and Apple App Store)
Then follow the steps below:
1. Insert the Smart Plug into socket, on the power supply and the LED indicator will begin
flashing green or red.
Tip: If the LED indicator is not flashing, please press and hold the reset button for 10 seconds (LED
indicator will flash three times at three seconds and flash again three times at 10 seconds) then the
indicator will keep flashing slow when the device is return to default factory setting.
2. Open Maevi App and go to "Home Automation" tab.
3. Select "Add New Device" button to pair the Smart Plug with the Gateway.
Tip: You can also press and hold the "Z" button on the Gateway for two seconds until the LED indicator
turns steady blue.
3
Pairing Device
Button
Advertisement
