Advertisement
Quick Links
Advertisement
Related Manuals for Maevi Smart Plug
Summary of Contents for Maevi Smart Plug
- Page 1 Maevi Smart Plug Quick Start Guide...
- Page 2 Introduction The Maevi Smart Plug monitors the energy usage of connected appliances. It allows you to turn these devices on and off remotely as well as setting on/off schedules from Maevi app. Get to know your device Buttons On/Off button Used to switch the socket ON and OFF •...
-
Page 3: Get Started
(Available for download on Google Play Store and Apple App Store) Then follow the steps below: 1. Insert the Smart Plug into socket, on the power supply and the LED indicator will begin flashing green or red. Tip: If the LED indicator is not flashing, please press and hold the reset button for 10 seconds (LED indicator will flash three times at three seconds and flash again three times at 10 seconds) then the indicator will keep flashing slow when the device is return to default factory setting. - Page 4 4. The Smart Plug is successfully paired with the Gateway when the LED indicator at the Smart Plug turns solid. 5. The Smart Plug should now appear in the app as Smart Plug. If not, refresh the “Home Automation” page by pull it down and release.
- Page 5 Features Info Tab – Energy Consumption / Reset Energy Consumed / Remove Device / Rename Device / Device Info Edit Button Energy Consumption Reset Sum Energy and Sum Cost (Accumulated) To Remove Device To Rename Device Device Status/ Info To Save Changes...
- Page 6 Automation Tab - Create Schedule to turn On/Off Appliance Select status : ON/OFF Select Time, Select Automation tab, tap Confirm + Add new automation schedule Successful create View details, Select Day, schedule tap Confirm tap Confirm...
- Page 7 Reset Smart Plug Step: 1. Insert the Smart Plug into socket, on the power supply. 2. Use a pin key tool to press and hold the reset button for 10 seconds (LED indicator will flash three times at three seconds and flash again three times at 10 seconds).