Other Operations; Changing The Distance Units; Turning On The Backlight; Auto Power Off - Bushnell BackTrack 360051 Quick Start Manual

Changing the Distance Units

• To change the units from English to Metric, HOLD both the MArK and MODE/POwEr buttons when any
of the three location icons is selected- the distance units display changes from "yd" to "m". The BackTrack will
automatically switch from yards to miles (or meters to km) for longer distances. It can display up a maximum
distance of 999 miles or kilometers.

Turning on the Backlight

• PUSH MARK to turn on the display backlight at anytime. It will automatically turn off in 30-45 seconds.

Auto Power Off

• Power automatically turns off after 10 minutes if no buttons have been pressed, or HOLD down MODE/POwEr
to turn off manually. When the BackTrack is turned back on, it returns to the last mode you selected.
HOLD
In a
Location
Mode
HOLD both MODE/POwEr and
MArK to select English or Metric
units for displayed distance
(yd & mi or m & km).

Other Operations

HOLD
PUSH
PUSH MArK to
activate backlight.
9