Mitox CS380X Premium Operator's Manual
  1. Manuals
  2. Brands
  3. Mitox Manuals
  4. Chainsaw
  5. CS380X Premium
  6. Operator's manual

Mitox CS380X Premium Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
www.mitox.co.uk
Operator's Manual
user manual, maintenance instructions and spare parts
CS380X / CS410X PREMIUM Chainsaw
Read this manual carefully before operating the machine
Original Instructions Version July 16
CS380X-410X_130716

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CS380X Premium and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Mitox CS380X Premium

Summary of Contents for Mitox CS380X Premium

  • Page 1 Operator’s Manual user manual, maintenance instructions and spare parts CS380X / CS410X PREMIUM Chainsaw Read this manual carefully before operating the machine Original Instructions Version July 16 CS380X-410X_130716...

  • Page 2: Component Location

    CS380X / CS410X PREMIUM Chainsaw Component Location Saw chain Guide bar Chain brake Starter handle Air filter cover Lock nut Choke knob Throttle trigger lock lever Rear handle Throttle trigger Engine switch Oil tank Fuel tank Front handle Guide bar scabbard PRODUCT DESCRIPTION This Chainsaw is a 2 stroke fast running power tool and is designed to be used in a domestic ap- plication for cutting wood only.

  • Page 3: Warnings In The Manual

    CS380X / CS410X PREMIUM Chainsaw Warnings in the Manual This mark indicates instructions which must be followed in order to prevent accidents which could lead to serious bodily injury or death. IMPORTANT This mark indicates instructions which must be followed or it leads to mechanical failure, breakdown, or damage.

  • Page 4: Taking Care Of Warning Labels

    CS380X / CS410X PREMIUM Chainsaw Directive 2000-14/CE. Guaranteed noise levels Danger: Risk of intoxication Danger: Risk of fire or explosion Hot surface, risk of burn Taking Care of Warning Labels Always keep warning labels clean and free of scratches, which might make them illegible or difficult to read.

  • Page 5: Safety Precautions

    Keep this manual handy so that you may refer to it later whenever any questions arise. Also note that you are able to contact your authorised MITOX® dealer for assistance. Always include this manual when selling, lending, or otherwise transferring the ownership of this product.
  • Page 6 CS380X / CS410X PREMIUM Chainsaw This Chainsaw is equipped with extremely an extremely sharp blade, always wear sturdy gloves when handling the blades and fit the safety guards when not in use. When using this Chainsaw for the first time, take it to a wide, clear, open space, start the engine, and practice handling the Chainsaw until you are sure that you will be able to handle it properly in actual operation.

  • Page 7: Safety And Operation

    CS380X / CS410X PREMIUM Chainsaw Work Clothing & Safety Equipment When using this product, you should wear the correct Personal Protective Equipment. • Helmet • Safety goggles / face protector • Ear protection • Thick work gloves • Non-slip, steel toe capped work boots •...

  • Page 8: Before Starting The Engine

    If this cannot be achieved, take your machine to your authorised MITOX® dealer for adjustment. Avoid Noise Problems...
  • Page 9 CS380X / CS410X PREMIUM Chainsaw • Maintain full engine speed when cutting. • Never allow other persons to come within the work area as doing so might expose them to danger. • If a branch or other object gets caught in the blades during operation, always turn off the engine before removing the object.
  • Page 10 CS380X / CS410X PREMIUM Chainsaw In the Box A standard saw unit package contains the items as illustrated Power unit Saw chain Guide bar Bar protector Plug wrench Spike and mounting screws, dependent on model Not pictured Owner’s manual Original Instructions Version July 16 CS380X-410X_150716...

  • Page 11: Safe Handling Of Fuel

    CS380X / CS410X PREMIUM Chainsaw Safe Handling of Fuel The engine of the Chainsaw is designed to run on a two stroke oil/fuel mixture. This fuel is highly flammable; never store cans of fuel or refill the fuel tank in any place where there is a source of heat or fire, which might ignite the fuel.
  • Page 12 NOTE Due to increased Ethanol content in petrol we recommend the use of B3C Ethanol Shield 2-Stroke Oil, or Ethanol Shield Fuel Stabiliser to protect your MITOX® engine against the harmful effects of Ethanol. Visit www.b3cfuel.co.uk for more information. IMPORTANT...

  • Page 13: Chain Oil

    CS380X / CS410X PREMIUM Chainsaw When storing the Chainsaw for a period of more than one month, empty the fuel tank and run the engine to empty the carburettor of fuel. Two-stroke fuel can cause deterioration of rubber and/or plastic components during prolonged storage.

  • Page 14: Installing The Guide Bar And Chain

    CS380X / CS410X PREMIUM Chainsaw Installing the Guide Bar and Chain Open the box and install the guide bar and the saw chain on the power unit as follows: The saw chain has very sharp edges. Use thick protective gloves for safety. Pull the chain brake towards the front handle to check that the chain brake is not on.

  • Page 15: Chain Brake

    CS380X / CS410X PREMIUM Chainsaw Chain Brake This machine is equipped with an automatic brake to stop the saw chain rotation upon the occurrence of kickback during saw cutting. The brake is automatically operated by inertial force, which acts on the weight fitted inside the front guard. The brake can also be operated manually by pushing the chain brake forward towards the guide bar.

  • Page 16: Kickback Safety Precautions

    CS380X / CS410X PREMIUM Chainsaw Kickback Safety Precautions Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Top contact in some cases may cause a lightning fast reverse reaction, kicking the guide bar up and back towards the operator.

  • Page 17: Operating The Engine

    CS380X / CS410X PREMIUM Chainsaw Operating the Engine Fill fuel (2) and chain oil (1) tanks respectively, and tighten the caps securely. Set the switch (3) to “I” position. Press the primer button (4) 6 times. Pull out the choke knob (5). The choke will close and the throttle will be set in the starting position.

  • Page 18: Stopping The Engine

    CS380X / CS410X PREMIUM Chainsaw Hot Engine Start Set the switch (3) to “I” position. Pull out the choke knob (5), then push the choke knob back in, this will set the choke to the hot start position. Apply the chain brake (7) by pushing the chain brake forwards. Pull the starter handle until the engine runs.

  • Page 19: Checking The Oil Supply

    CS380X / CS410X PREMIUM Chainsaw Checking the Oil Supply After starting the engine, run the chain at medium speed and see if chain oil is sprayed as shown in the figure. Care and Maintenance of Your Chainsaw • In order to maintain your chainsaw in good working order, perform the maintenance and checking operations described in this manual at regular intervals.

  • Page 20: Maintenance After Each Use

    CS380X / CS410X PREMIUM Chainsaw Maintenance IMPORTANT • After every use, check that all nuts, bolts and screws are securely fastened and tighten if necessary. • In the event of an accident, breakdown or blockage, ensure the engine is turned off before any work is carried out to rectify this.
  • Page 21 CS380X / CS410X PREMIUM Chainsaw Maintenance After Each Use Oiling port Dismount the guide bar and check the oiling port (1) for clogging. Guide bar When the guide bar is dismounted, remove sawdust from the bar groove and the oiling port. Grease the nose sprocket with a sprocket grease gun (Oregon part number 21939) Guide bar groove Oil hole...

  • Page 22: Periodical Service Points

    CS380X / CS410X PREMIUM Chainsaw Periodical Service Points Cylinder Fins Dust clogging between the cylinder fins will cause overheating of the engine. Periodically check and clean the cylinder fins after removing the cylinder cover. When installing the cylinder cover, make sure that switch wires and grommets are fitted correctly.
  • Page 23 CS380X / CS410X PREMIUM Chainsaw Adjusting Oil Flow Rate Never fill the oil reservoir or adjust the oiler with the engine running. An increase in bar oil flow rate will speed oil consumption, requiring more frequent checks on the oil reservoir.

  • Page 24: Saw Chain Sharpening

    CS380X / CS410X PREMIUM Chainsaw Saw Chain Sharpening The chain needs to be sharpened when: Sawdust becomes powder-like. You need extra force to saw with. The cut path does not go straight. Vibration increases. Fuel consumption increases. Be sure to wear safety gloves. •...

  • Page 25: Adjusting The Carburettor

    CS380X / CS410X PREMIUM Chainsaw Adjusting the Carburettor The carburettor has been factory adjusted, but may require fine tuning due to a change in operating conditions. Before adjusting the carburettor, make sure that the provided air/fuel filters are clean and the fuel properly mixed. When adjusting, take the following steps: Stop the engine and screw in both the H and L needles until they stop.

  • Page 26: Service Schedule

    CS380X / CS410X PREMIUM Chainsaw Service Schedule Every Every Every Before Component Procedure Note Hours Hours Hours Fuel Leaks / Fuel Wipe Out • Spillage Fuel Tank / Fuel Inspect / Clean Replace if • • Filter Neccessary Idle Adjusting See Adjusting Adjust if •...

  • Page 27: Specifications

    CS380X / CS410X PREMIUM Chainsaw Specifications Power unit Displacement CS380X……………………………………………………………………………………37.2cc CS410X......……………………………………………………………..40.1cc Maximum engine power CS380X……………………………………………………………………………………1.2kW CS410X………………………………..………………………………………………...1.5kW Fuel……………………………………………….Mixture (Unleaded Petrol 40 : two-stroke oil 1) Fuel tank capacity……………………………………………………………………..…390ml Chain oil..………………..…………………………………………..Anti-fling Chain Oil Oil tank capacity…………………………………………………………………………...210ml Carburettor……………………………………………………………………… Diaphragm type Fuel consumption at maximum engine power…………………………………………450g/kw·h Idling speed…………………………………………………………………………...
  • Page 28 CS380X / CS410X PREMIUM Chainsaw Specifications Cutting gear Guide bar Type.........................Sprocket nose Size CS380X...........................14in CS410X...........................16in Cutting length CS380X........................330mm(14”) CS410X ........................370mm(16”) Saw chain Type.........................Oregon 91VXL Pitch.............................3 / 8 “ Gauge........................0.050” / 1.3mm Original Instructions Version July 16 CS380X-410X_150716...
  • Page 29 CS380X / CS410X PREMIUM Chainsaw CS380X Parts - Base Unit Original Instructions Version July 16 CS380X-410X_150716...
  • Page 30 CS380X / CS410X PREMIUM Chainsaw CS380X Parts - Base Unit PART NUMBER DESCRIPTION PART NUMBER DESCRIPTION MITCS3800.04.00-00 CHAINBRAKE ASSY MIGB/T96 M5 WASHER M5 MIYD38-5.12.00-6 RETAINER MIYD38-3.04.00-16 SCREW M5X40 MIYD38-3.04.00-13 SLEEVE MIYD38-5.12.00-5 TENSION SPRING MIYD38-3.04.00-12 SLEEVE MIYD38-3.02.00-6 RECOIL ROPE 3X920 MITCS3800.04.00-2 CHAINBRAKE LEVER MIYD38-7.02.00-4 STARTER PULLEY (NEW...
  • Page 31 CS380X / CS410X PREMIUM Chainsaw CS380X Parts - Base Unit PART NUMBER DESCRIPTION MIYD38-3.03.00-8 SAFETY LOCK SPRING MIYD38-3.03.00-7 THROTTLE TRIGGER MIYD38-5.00.00-6 THROTTLE LINK MITCS3800.03.00-10 REAR HANDLE GRIP MIYD38-3.03.00-16 RETAINING CLIP MIYD38-3.00.00-2 OIL FEED PIPE 3.3X6.5X68 MIGB/T845 ST4.2X14 TAPPING SCREW ST4.2X14 MIYD38-3.01.06.00-00 WALBRO CARBURETOR MIYD38-3.01.00-17...
  • Page 32 CS380X / CS410X PREMIUM Chainsaw CS380X Parts - Engine Unit Original Instructions Version July 16 CS380X-410X_150716...
  • Page 33 CS380X / CS410X PREMIUM Chainsaw CS380X Parts - Engine Unit PART NUMBER DESCRIPTION PART NUMBER DESCRIPTION MITCS3800.04.00-00 CHAINBRAKE ASSY MIYD38-5.00.00-10 CHOKE ROD MIYD38-3.04.00-16 SCREW M5X40 MITCS3800.02.00-1 SIDE PLATE MIYD38-3.04.00-13 SLEEVE MITCS3800.02.00-00 RECOIL STARTER ASSY MIYD38-3.04.00-12 SLEEVE MIGB/T845 ST4.8X13 TAPPING SCREW ST4.8X13 MITCS3800.04.00-2 CHAINBRAKE LEVER MIGB/T96 M5...
  • Page 34 CS380X / CS410X PREMIUM Chainsaw CS410X Parts - Base Unit Original Instructions Version July 16 CS380X-410X_150716...
  • Page 35 CS380X / CS410X PREMIUM Chainsaw CS410X Parts - Base Unit PART NUMBER DESCRIPTION PART NUMBER DESCRIPTION MITCS3800.04.00-00 CHAINBRAKE ASSY MIGB/T96 M5 WASHER M5 MIYD38-5.12.00-6 RETAINER MIYD38-3.04.00-16 SCREW M5X40 MIYD38-3.04.00-13 SLEEVE MIYD38-5.12.00-5 TENSION SPRING MIYD38-3.04.00-12 SLEEVE MIYD38-3.02.00-6 RECOIL ROPE 3X920 MITCS3800.04.00-2 CHAINBRAKE LEVER MIYD38-7.02.00-4 STARTER PULLEY (NEW...
  • Page 36 CS380X / CS410X PREMIUM Chainsaw CS410X Parts - Base Unit PART NUMBER DESCRIPTION MIYD38-3.03.00-8 SAFETY LOCK SPRING MIYD38-3.03.00-7 THROTTLE TRIGGER MIYD38-5.00.00-6 THROTTLE LINK MITCS3800.03.00-10 REAR HANDLE GRIP MIYD38-3.03.00-16 RETAINING CLIP MIYD38-3.00.00-2 OIL FEED PIPE 3.3X6.5X68 MIGB/T845 ST4.2X14 TAPPING SCREW ST4.2X14 MIYD38-3.01.06.00-00 WALBRO CARBURETOR MIYD38-3.01.00-17...
  • Page 37 CS380X / CS410X PREMIUM Chainsaw Notes Original Instructions Version July 16 CS380X-410X_150716...
  • Page 38 CS380X / CS410X PREMIUM Chainsaw CS410X Parts - Engine Unit Original Instructions Version July 16 CS380X-410X_150716...
  • Page 39 CS380X / CS410X PREMIUM Chainsaw CS410X Parts - Engine Unit PART NUMBER DESCRIPTION PART NUMBER DESCRIPTION MI05.01.02.020 CYLINDER MIGB/T2672 M5X12 SCREW M5X12 MIGB/T6185.1 M5 NUT M5 MIYD38-3.01.00-15 CHAIN CATCHER MIGB/T93 M5 SPRING WASHER M5 MIYD38-3.01.00-16 CHAIN CATCHER SCREW MIGB/T97.1 M5 WASHER M5 MIYD38-3.01.00-4 DAMPER...
  • Page 40 CS380X / CS410X PREMIUM Chainsaw Notes Original Instructions Version July 16 CS380X-410X_150716...

  • Page 41: Ec Declaration Of Conformity

    CS380X / CS410X PREMIUM Chainsaw EC Declaration of Conformity We Mitox (Rochford Garden Machinery Ltd) - BA9 9RS (importer) declare that the product(s): Designation: Chainsaw for forest service for ordinary use, with petrol engine Model(s): Mitox CS380X Premium Type/Serial No:...
  • Page 42 CS380X / CS410X PREMIUM Chainsaw EC Declaration of Conformity We Mitox (Rochford Garden Machinery Ltd) - BA9 9RS (importer) declare that the product(s): Designation: Chainsaw for forest service for ordinary use, with petrol engine Model(s): Mitox CS410X Premium Type/Serial No:...
  • Page 43 CS380X / CS410X PREMIUM Chainsaw Notes Original Instructions Version July 16 CS380X-410X_150716...
  • Page 44 The manufacturer undertakes to replace any spare parts that are classified as defective by an appointed Mitox service dealer. The manufacturer will not accept liability for the replacement of the machine, either partially or wholly, and /or consequential damages and /or interest charges either directly or indirectly.

This manual is also suitable for:

Cs410x premium

Table of Contents