Download Print this page

Canam Hoops Backstop Net Installation Instructions Manual

Backstop Net

Installation Instructions

Version 2.0

Table of Contents

Need help?

Do you have a question about the Backstop Net and is the answer not in the manual?

Page 2  All parts and components necessary to complete Keep this installation manual as a reference for your proper installation are included within this product. safety and the safety of those playing on the Do not use parts not included with our system. basketball system. Additional copies of these safety Failure to follow this requirement could cause instructions are available by visiting our website at : product malfunction and will void warranty of this www.canamhoops.com product.  Keep all organic materials away from parts and components to avoid corrosion.  Hoop. Please use caution when performing this  Do not climb on any part of the basketball system as it was not intended for this activity.  Do not use the basketball system as a lift or to hoist anything Version 2.0 CANAM HOOPS © all rights reserved.
Page 4 B : Thread a Flat Washer(PB) to each Hexagon Bolt. Then thighten the Fixed Plate(AP) onto the Pole STEP : 2 A : Screw the Fiber Glass Bar (A) and (B). Remmember to screw the Fiber Glass Bars (A&B) tightly. Version 2.0 CANAM HOOPS © all rights reserved.
Page 5 B : Screw the Fiber Glass Bar with the net(AN) through the fixed Plate(AP) STEP : 4 A : Put the Ground Pins(P) onto the ground to fix the position. Remember to across the hole(H) of the net. Version 2.0 CANAM HOOPS © all rights reserved.