Electrical Connection; Activation Instructions; Activation Instructions For Eco Dob; Activation Instructions For Eco Dob E - Primula Eco DOB Manual

5. Electrical Connection

For the electrical connection and above all for the power supply, please follow carefully the instructions
of the wiring diagram (enclosed) as well the warning signs symbols attached on the machine. In case
you have purchased a single phase machine 230V, connect the machine to the power into the socket
230V/16A. The connection should be done with 3-phase 3Χ1,5 mm (1 phase, 1 neutral, 1 grounded). The
power should be provided with a fuse 10Α.
CAUTION! For your own safety, pay attention to all the warning labels (yellow colored) that are placed
on the machine. The manufacturer bears no liability for any damages or accidents due to faulty
supplying network or to not specified personnel.

6. Activation Instructions

6.1 Activation instructions for Eco DOB

For the instructions mentioned in the current section please see the below image (picture 3).
 Turn on the main switch No 01.
 Switch the thermostat No 03 at the temperature of 110°C during the winter and 90°C during the
summer.
 Whenever you want to use the suction just press the suction pedal.
 Adjust the steam quantity of the steam generator in proportion to the suction performance of
the table, in order to avoid steam liquidation on the working surface. The refined fabrics require
small quantity of steam, while the gross fabrics require big quantity of steam.
 The ironing buck's heating is activated when you press switch No 2 to position I.

6.2 Activation instructions for Eco DOB E

For the instructions mentioned in the current section please see the below image (picture 4).
Picture 3: Switches placed on Eco DOB
Picture 3: Switches placed on Eco DOB E
7
Instruction Manual