Warning Marks Placed On The Ironing Table; Electrical Connection; Activation Instructions - Primula Tailor Manual

 Please contact your dealer or the manufacturer for any malfunction or further information
requests

3.2 Warning marks placed on the Ironing Table

The following attention marks are placed on each ironing table:
The operator of the system has the obligation to inform himself regarding the dangers which may occur
during usage, so that he/she can avoid them or minimize their occurrence as best as he/she is able to.

4. Electrical Connection

For the electrical connection and above all for the power supply, please follow carefully the instructions
of the wiring diagram (enclosed) as well the warning signs symbols attached on the machine. In case
you have purchased a single phase machine 230V, connect the machine to the power into the socket
230V/16A. The connection should be done with 3-phase 3Χ1,5 mm (1 phase, 1 neutral, 1 grounded). The
power should be provided with a fuse 10Α.
CAUTION! For your own safety, pay attention to all the warning labels (yellow colored) that are placed
on the machine. The manufacturer bears no liability for any damages or accidents due to faulty
supplying network or to not specified personnel.

5. Activation Instructions

For the instructions mentioned in the current section please see the below image (picture 2).
 Turn on the main switch No 01.
3
Picture 2: Switches placed on Tailor
6
Instruction Manual
1
2