8 Checking the Operating Status of the BTS3900
Figure 8-4 Board Management window
Step 2 Right-click the GTMU.
A shortcut menu is displayed.
Step 3 Choose Loop Test from the shortcut menu.
The Loop Test dialog box is displayed, as shown in
Figure 8-5 Loop Test dialog box
Step 4 Click Start.
After the test is complete, the result is displayed on the status bar at the bottom of the dialog
box.
Step 5 Close the Loop Test dialog box, and then double-click the GTMU on the Board
Management window.
8-8
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Commissioning Guide
Figure
8-5.
Issue 03 (2008-07-15)
BTS3900 GSM