Gateway M-6752 Install Manual page 9

Replacing a Memory Module
9 If you are removing a module, gently press outward on the clip
at each end of the memory module until the module tilts upward.
Technical Support
See the label on the bottom of the notebook for Customer Care Information. See
your Reference Guide for important safety, regulatory, and legal information.
Clip
Clip
10 Pull the memory module out of the slot.
11 Hold the new or replacement module at a 30-degree angle and
press it into the empty memory slot. This module is keyed so it
can only be inserted in one direction. If the module does not fit,
make sure that the notch in the module lines up with the tab in
the memory bay.
12 Replace the memory bay cover, then tighten the cover screw.
13 Insert the battery, then turn your notebook over.
14 Connect the power adapter, modem cable, and network cable
15 Reconnect all peripheral devices and replace any Express cards.
© 2007 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks
or registered trademarks of Gateway, Inc. in the United States and other countries.
All other brands and product names are trademarks or registered trademarks of
their respective companies.
2