Ports And Buttons - Tenda HG9 Quick Installation Manual

Ports & Buttons
Port/Button
Telephone port.
TEL
Used to connect to a telephone for voice service.
Optical fiber port.
PON
Used to connect to a fiber cord.
Gigabit LAN ports.
LAN1/2/3/4
Used to connect to a router, switch, computer or IPTV set top box.
Power jack.
POWER
Please use the included power adapter to connect the ONT to a power source.
Power on/off button.
ON/OFF
Press the button to turn on or off the ONT.
Port/Button
LED indicator on/off button.
LED
Press the button to turn on or off the LED indicators of the ONT.
WPS button.
WPS
Press the button to start the WPS negotiation process of the ONT. The WPS LED indicator blinks.
Within 2 minutes, enable the WPS function on a WPS-supported device to establish a WPS connection.
Wi-Fi network button.
WLAN
Press the button to enable or disable the Wi-Fi network of the ONT.
Reset button.
After the ONT completes startup, use an object with a spike to hold down the button for 10 or more
RESET
seconds and release it. All LED indicators light off in a few seconds. When the POWER LED indicator
lights solid on again, the ONT is reset.
USB 2.0 port.
USB
Used to connect to a USB storage for resource sharing.
Tips:
This ONT supports wall mounting (two mounting holes on the bottom). The recommended parts are
as follows:
Expansion bolt: PA6*26.4mm; inner diameter: 2.4mm
Screw: Quantity: 2; Diameter: 3.0-4.0mm; head diameter: 5.0-6.5mm; head thickness: ≤2.0mm.
This ONT is only suitable for mounting at heights ≤ 2m.
TEL PON LAN4
LED WPS WLAN
LAN3 LAN2 LAN1
Description
RESET USB
Description
2
POWER ON/OFF