Commissioning, Inspection, Maintenance; Steps - Commissioning, Inspection And Maintenance - Viessmann MatriX Service Instructions Manual

Steps - commissioning, inspection and maintenance

For further information regarding the individual steps, see the page indicated
• • •
•
•
• • •
• • •
• • •
• • •
• • •
• •
• •
• •
• •
• •
•
• •
• •
• • •
•
•
Commissioning steps
Inspection steps
Maintenance steps
1. Commissioning the system...........................................
2. Checking the gas type....................................................
3. Conversion to natural gas LL........................................
4. Checking the static and the supply pressure..............
5. Checking the nozzle pressure....................................... 10
6. Checking the CO
7. Checking the CO content
8. Checking the flue gas temperature
9. Checking the ionisation current.................................... 14
10. Shutting down the system............................................. 15
11. Checking the burner gauze assembly.......................... 16
12. Checking the ignition and ionisation electrodes......... 17
13. Cleaning the burner........................................................ 18
14. Fitting the burner............................................................ 18
15. Checking both gas train valves for tightness.............. 19
16. Checking the filter insert (if installed) in the gas
supply pipe and replacing if required
17. Checking all gas connections for tightness................ 19
18. Final testing..................................................................... 20
19. Operating and service documents................................ 20

Commissioning, inspection, maintenance

content............................................. 12
2
Page
6
7
7
8
5