Page 1
RD40-22mm Adaptor OR030110 Connection for APA, or SGE Gas Masks to HEPA filters (conical connector 22mm - ISO 5356-1) MESTEL SAFETY Srl OCEAN REEF Inc Via Arvigo, 2 2510 Island View Way 16010 Sant’Olcese Vista, CA 92081 Genova (Italia) Phone +1 760 744 9430 Tel.
Page 2
INSTALLATION 1a. On APA (ARIA Protection Adaptor) 1b. On SGE Mask (150, 400/3, 400/3 BB) Install APA as shown in its instructions and If the SGE mask has more filter connections, choose read the warnings. the most confortable and remove the plug from it. Installare l’APA seguendo le istruzioni e i Se il modello di maschera SGE presenta più...
Page 3
CLEANING & MAINTENANCE • Remove any filter connected to the adaptor prior to sterilization. • NEVER use any solvent, cleaner or abrasive product to clean the Mask, the APA Adaptor or the RD40 Adaptor. • Clean each product (Mask, APA, RD40) by either: TREATMENT IN DILUTED ETHANOL 1.
Page 4
INSTRUCTIONS Understand and follow all warnings and instructions. Prior to use the adaptors, verify that the snorkeling mask properly works and that all parts are present, undamaged, and correctly installed. NO modifications, alterations or damages must be present on the snorkeling mask. If the mask would show one of the problems listed above, DO NOT proceed with installation of the adaptors since the mask does not work properly.