Table of Contents
Advertisement
Send Application to GPS Unit
After installing the Application software to your hard drive you
may transfer it to your GPS Unit. If you are not sure about
this procedure, call technical support before loading
application software.
1. After the file has been copied to your hard drive, click
on the Application selection under the File menu item.
Select "Send Application to GPS Unit."
2. In the "Open" dialogue box, select the appropriate file in
the Apollosw subdirectory. Now, press "OK."
Apollo 360 units require a special power-on button
sequence to update the application software. See the
Apollo GPS Product Information section in this
manual (page 37). Newer information may be on the
diskette that came with your software upgrade.
The transfer will take several minutes. After the transfer is
completed, verify that the download was successful by checking
the Waypoint Manager and Apollo GPS screens. Your new
software will be in place the next time you turn on your Apollo
GPS.
Note
Advertisement
Table of Contents
