Table of Contents
Advertisement
I- Preface
Thank you for purchasing the ABI SENTRY Counterfeit IC Detector. Please refer to this manual before attempting to turn on or
operate the equipment.
1.1 How to use this manual
This manual is divided into sections describing all aspects of the SENTRY operation. There is a getting started guide (also
available from the welcome screen in the software), designed to get you up and working quickly, followed by more detailed
instructions on the various operating modes and functions. We recommend you read at least sections I to III before turning on
the SENTRY for the first time.
This symbol is used where high voltages are involved and care should be taken in operation.
This symbol is used where the information given is important to prevent damage to the system or device under test,
or to ensure accurate results.
For the latest product information, including an up to date copy of this manual and the latest software, please visit
www.abielectronics.co.uk.
1.2 Precautions
a) Power supply
The SENTRY operates from a mains supply and contains hazardous voltages inside. Do not open the cover at any
time. See the rear panel label for information on operating voltage specifications and fuse ratings. The SENTRY must
be earthed at all times and should not be used with a 2 core mains cable under any circumstances.
b) CE compliance
The SENTRY is designed to comply with the latest European EMC and safety standards. However, ABI cannot guarantee
compliance in all circumstances when customer-supplied external
conjunction with other equipment not supplied by ABI. We recommend that you use ABI supplied accessories where possible.
The SENTRY is designed to operate in "Residential, Commercial and Light Industrial" environments and is not approved for
operation in heavy industrial, medical, automotive or aircraft environments unless confirmed in writing by ABI.
c) Location
The SENTRY should be installed indoors on a suitable workbench with a permanent mains supply and connected to a suitable
PC via a USB cable. Do not use outside or in damp conditions. Do not block the rear fan exits as this may cause the unit to
overheat.
Do not apply any external signals or voltages to any of the IC sockets or connectors. This may cause damage and
invalidate the warranty.
d) Environmental limits
The SENTRY is a precision instrument, but as with all electronic equipment the calibration and accuracy can be affected by
extreme environmental conditions. For best results, we recommend: -
Use in temperatures from 10ºC to 30ºC, humidity from 20% to 80%
Ensure there is space around the unit for ventilation, and do not block the fan vents at the rear
Avoid exposure to direct sunlight or sources of heat such as radiators
Avoid exposure to strong magnetic fields such as from loudspeakers
e) Mobile phones
Use of a mobile telephone in close proximity may cause equipment malfunction and/or give inaccurate readings.
recommend a minimum distance of 50cm from the nearest mobile telephone in use.
1.3 Power switching
As with any mains powered equipment there is a power surge at switch on. Do not switch the unit rapidly on and off
repeatedly, instead wait at least 5 seconds after power down before switching on again. Failure to observe this
precaution may blow the mains fuse and possibly damage the equipment.
Copyright © 2012 - 2017 ABI Electronics Ltd
Socket Adapters
are connected or the equipment is used in
We
Page 3
Advertisement
Table of Contents
