Page 2
175-A314-016-353 155-A314-016-353 -A314-016-353 SAFETY READ THIS MANUAL FIRST BEFORE INSTALLING OR OPERATING YOUR POWER LIFT AND RECLINE CHAIR. IMPORTANT SAFETY INSTRUCTIONS WARNING: It is important that you read, understand and follow ALL safety instructions. Please keep the safety instructions for future reference.
Page 3
Lift Chair 1) HAND CONTROL Connects to a standard electrical outlet to provide power to the lift chair, may be equipped with an LED which will show green to indicate power to the transformer. Responds to the hand control commands to position the chair in the sit and stand positions.
Page 4
Assembly Your lift chair requires assembly before initial use. LIFT CHAIR SETUP 1. Align back brackets with mechanism posts. to ensure the back is locked in properly. NOTE: Pull up on the chair back to ensure that it is locked in place. Snap Residential Use Only...
Page 5
Operation LIFT CHAIR PLACEMENT Your lift chair should be placed near a standard electrical outlet on dry, level ground where there is ample room to allow for proper operation. We recommend that you have assistance when positioning the lift chair to avoid the possibility of injury when lifting.
Page 6
FCC Statement NOTE: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, by the party responsible for compliance could void user’s authority to operate the equipment. an area rug or furniture pads.
Need help?
Do you have a question about the 175-A314-016-353 and is the answer not in the manual?
Questions and answers