Advertisement
Quick Links
MODEL NUMBER
APRIL
6055-522
6056-522
Your little one will sleep secure in this Creations Crib. Proper assembly will ensure every
effort has been made to design this crib with you baby's safely in mind. It is certified to
meet all safety guidelines from the JPMA-Juvenile Products Manufactures Association and
the CCPSC-Consumer Product Safety Commission.
Thank you for purchasing a Creations Crib. If you find that you are missing a part or if a part
Or if a part is defective in any way, contact your Creations retailer for assistance.
Advertisement
Related Manuals for HOME MERIDIAN Creations baby 6055-522
Summary of Contents for HOME MERIDIAN Creations baby 6055-522
- Page 1 MODEL NUMBER APRIL 6055-522 6056-522 Your little one will sleep secure in this Creations Crib. Proper assembly will ensure every effort has been made to design this crib with you baby’s safely in mind. It is certified to meet all safety guidelines from the JPMA-Juvenile Products Manufactures Association and the CCPSC-Consumer Product Safety Commission.
- Page 2 READ THIS PAGE BEFORE CRIB ASSEMBLY Model Number: 6055-522 6056-522 Page 2 FOR CRIB: WARNING: Failure to follow these warnings and assembly instructions could result in serious injury or death. -CAUTION :Any mattress in this crib must be at least 27 1/4 inches x 51 5/8 inches with a thickness not to exceed 6 inches.
-
Page 3: Identifying The Parts
MODEL MUMBER: 6055-522 6056-522 Page 3 Identifying the Parts The crib illustrations in these instructions are generic in nature. The crib you have purchased may not look like the ones illustrated; however, they all assemble in the same manner. -
Page 4: Identifying The Hardware
MODEL MUMBER: 6055-522 6056-522 Page 4 Identifying the Hardware Identify the hardware included in the hardware bag using the illustrations below. 14 Decorattive bolts 2-3/4”(1/4”*20thread) 4 Decorattive bolts 1-1/4”(1/4”*20thread) 4 Decorattive bolts 5/8”(1/4”*20thread) 1 Allen wrench... - Page 5 MODEL MUMBER: 6055-522 6056-522 Page 5 ASSEMBLING AND OPERATING YOUR CRIB NOTE: Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE REFERENCE. This crib conforms to JPMA-Juvenile Products Manufacturers Association and the CPSC-Consumer Product Safety Commission. Please adhere to the following guidelines for assembly, operation and maintenance. Power tools are not recommended for assembling your furniture.
- Page 6 MODEL MUMBER: 6055-522 6056-522 Page 6 Step 2: Assemble Footboard then Assemble Crib. Use six(6) each 2-3/4”bolts to assemble footboard to left and right posts. Tighten snugly with Allen wrench. To attach the and spring assembly to the head and footboard, use eight(8) each 2-3/4” bolts thru the holes in the end uprights and tighten snugly into the inserts.
- Page 7 MODEL MUMBER: 6055-522 6056-522 Page 7 To CONVERT to Day bed with spring in lowest position: Remove front frame from front posts. Keep base mounding in same position. Attach Guard Rail with four(4) each 1-1/4”hex head bolts. Select guard rail for left or right position(your decision). Once Guard Rail is attached to Youth Rail bolt this assembly to the inserts on the bottom of the front posts with four (4)each 2-3/4”...
- Page 8 MODEL MUMBER: 6055-522 6056-522 Page 8 INSTRUCTION FOR CONVERSION TO FULL SIZE(4/6)BED Make certain that all of the Footboard parts are fully assembled. There are two positions for the bed rails: an upper position and lower position . We recommend starting at the lower position . Use eight(8)2-3/4” bolts to connect the bed rails to the head and footboard.
- Page 9 MODEL MUMBER: 6055-522 6056-522 Page 9 CLEANING: Mix together a mild solution of gentle dishwashing liquid and water, apply to crib surface using a soft clean clothe lightly dampened in the solution. Rinse with clear water again using a soft clean cloth, then dry a;; surface thoroughly with a soft dry cloth.
Need help?
Do you have a question about the Creations baby 6055-522 and is the answer not in the manual?
Questions and answers