Advertisement
Quick Links
UPPER HUB Replica for RAPID REACTSM (am-4671) Assembly Guide
Included Parts & Hardware
Part
Item
1
ip-4671_uhb
2
am-4675
3
ip-4671_uhvr
4
Ip-4671_uhsr
5
ip-4671_uhlr
6
ip-4671_uhp
7
ip-4671_uhvp
am-4671 UPPER HUB Replica for RAPID REACT (SM) Assembly Guide v1.0
Item Description
Upper Hub Baseplate
Hub Angle Bracket
Upper Hub Vertical Rib
Upper Hub Small Rib
Upper Hub Large Rib
Upper Hub Panel
Upper Hub Vision
Plastic
Quantity
1
24
4
4
4
4
4
v1.1 1/21/2022
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for AndyMark am-4671
Summary of Contents for AndyMark am-4671
- Page 1 Upper Hub Baseplate am-4675 Hub Angle Bracket ip-4671_uhvr Upper Hub Vertical Rib Ip-4671_uhsr Upper Hub Small Rib ip-4671_uhlr Upper Hub Large Rib ip-4671_uhp Upper Hub Panel Upper Hub Vision ip-4671_uhvp Plastic am-4671 UPPER HUB Replica for RAPID REACT (SM) Assembly Guide v1.0...
- Page 2 2. Attach qty. 2 Hub Angle Brackets (item 2) to each of the Plastic Ribs (Small and Large) using the 1” screws (item 13, qty. 4 per Rib) and ¼-20 nuts (item 10, qty. 4 per Rib). 4 & 5 am-4671 UPPER HUB Replica for RAPID REACT (SM) Assembly Guide v1.0...
- Page 3 5. Repeat previous step with the Small Ribs (item 4, w/ Brackets, qty. 4), using the 1” screws (item 13, qty. 4 per Rib) and ¼-20 nuts (item 10, qty. 4 per Rib). am-4671 UPPER HUB Replica for RAPID REACT (SM) Assembly Guide v1.0...
- Page 4 Use cable ties at each Plastic joint, shown at item 9 below (qty. 8). Ensure the Vision Plastic is not upside down. Extra screws and nuts are for attaching agitator, (am-4674, sold separately, not included in Upper Hub) am-4671 UPPER HUB Replica for RAPID REACT (SM) Assembly Guide v1.0...
Need help?
Do you have a question about the am-4671 and is the answer not in the manual?
Questions and answers