Pure Distilling Reflux Kit Instructions Manual page 9

4. Fit the thermometer probe into the thermowell as shown below, the thermometer is
fitted with a magnet and a long probe lead so position the thermometer in a spot where
it is easy to read the display and access the controls.
5. Measure and cut a suitable length of the supplied vinyl hose to connect the condenser
to a water source, fit the supplied hose connectors to both ends of the hose. One end
connects to the tap (this may require a trip to the hardware store to source a suitable
fitting), the other end connects to one of the condenser water fittings as per the photo
below, it doesn't matter which one. Fit the remaining hose connector to the other
length of vinyl tubing, connect to the free condenser water fitting and put the other
end in a suitable drainage point e.g. in a sink or drain.