Pure Distilling Reflux Kit Instructions Manual page 15

3. The stainless spindle screws into the base of the fitting we just assembled on the top
bucket, and is made up of the parts shown below.
4. This Filter Cartridge assembly allows easy replacement of the Pure Distilling Filter
Cartridges. It is assembled as per below:
a. The silicon O-ring with the small hole fits at the base of the spindle, it is packaged
like that.
b. Then the Pure Distilling filter cartridge slides over the spindle, after being soaked.
c. The silicon O-ring with the large hole goes over the nut on the bottom of the
bucket.
d. This whole assembly is then screwed into the base of the fitting already in place
in the top bucket, again finger tight should ensure no leaks, do not over tighten!