Pure Distilling Reflux Kit Instructions Manual page 16

5. Fit the red handled plastic tap to the bottom filter bucket with the hole in the side
between the volume scale, The tap comes with two silicon washers, make sure there is
a silicon washer either side of the bucket. Do up tight and test for leaks.
6. Place the filter bucket lid with the big hole on the bucket with the tap.
7. Place the top filter bucket with the filter spindle onto the bottom bucket guiding the
filter spindle carefully through the hole in the lid.
8. The Smart Filter stainless steel stick plug pushes into the top of the thumbscrew (don't
screw it in, the O-ring will break) and acts as a plug, stopping any flow, push it in position
now ready for your batch.
9. Make sure the tap on the bottom bucket is closed!
10.You are now ready to filter your spirits, remember you need to replace the filter
cartridge for each wash!