Table of Contents
Advertisement
Available languages
Available languages
1. Plug HDD LED head to the "HDD LED"/ "HD LED"/ "IED LED"
pins on motherboard.
2. Plug Power LED head to the "PWR LED" pins on motherboard.
3. Plug Reset SW head to the "RST SW"/ "RES SW"/ "RST" pins
on motherboard.
4. Plug Power SW head to the "PWR SW"/ "PWR BTN"/ "RWR"
pins on motherboard.
ATTENTION! Plug "+" to "+" and "-" to "-".
13. – Connection and fan action: hub type (А).
You can adjust the light using the button on the output panel or connect the hub to the
motherboard. If you hold the button in the on position for a few seconds, the light turns off.
ARGB HUB-А:
1. Подключение USB 3.0.
2. Расположение разъемов/кнопок/индикаторов на панели.
3. Подключение HD AUDIO.
е.
.
26
EN
Advertisement
Table of Contents
