Camera Setup - Lorex L4248 Series Quick Start Manual

5

Camera Setup

1. Turn the adjustment ring counter-clockwise to loosen
and reposition the camera.
2. Screw in the antenna.
3. Insert the power pack into the bottom of the camera.
You will hear a 'beep' when the power pack is
Note:
properly inserted. If you do not hear this alert, remove
the power pack by pushing in on the battery release
tabs then re-insert.
L4248-Series_QSG_TRILINGUAL_R1.indd 9 L4248-Series_QSG_TRILINGUAL_R1.indd 9
Adjustment ring
2021-06-02 7:14:27 PM 2021-06-02 7:14:27 PM