Setting The Clock; Setting The Alarm Time - Eton SOUND 100 Operation Manual

WORKING WITH MEMORY PRESETS
There are 10 memory presets total, 5 each for AM, FM. Note that the
procedures below will also overwrite what has been previously stored
into the memory. That is, a memory cannot be 'erased', but can be
overwritten.
1. Using the procedures described previously, tune to the radio station
that you wish to store.
2. Press the MEMORY button for 2 seconds; the memory number will
flash in the LCD,
3. Immediately select the desired memory number with TUNING/SET
buttons.
4. Press the MEMORY button again.
ACCESSING MEMORY PRESETS
Tune to the band of your choice, AM or FM.
Use quick, short presses of the MEMORY button to choose stored sta-
tion of your choice, or use the remote's buttons 1-5.
SETTING THE CLOCK, ALARM AND SLEEP TIMER
Install two AA batteries to save these settings during power loss or
when unplugging the Eton Sound Radio (see diagram).
The clock, alarm, and sleep timer can be set in either 'standby' or 'on'
mode.
4
All manuals and user guides at all-guides.com

SETTING THE CLOCK

1. Press the radio's or the remote's TIME SET button for 3 seconds;
note that the minutes flash.
2. Use the radio's TUNING/SET buttons or the remote's TUNE +/- but-
tons to set the minutes.
3. Give the radio's or the remote's TIME SET button a quick, short
press: note that the hour flashes.
4. Use the radio's TUNING/SET buttons or the remote's TUNE +/- but-
tons to set the correct hour.
5. Press the radio's or the remote's TIME SET button to complete the
new time setting and to exit the time set mode.

SETTING THE ALARM TIME:

1. Press the radio's or the remote's ALARM button for 3 seconds; note
that the hour flashes.
2. Use the radio's TUNING/SET buttons or the remote's TUNE +/- but-
tons to set the desired wake-up hour.
3. Give the radio's or the remote's ALARM button a quick, short press;
note that the minutes flash.
4. Use the radio's TUNING/SET buttons or the remote's TUNE +/- but-
tons to set the correct minutes.
5. Press the radio's or the remote's ALARM button; note that the
speaker symbol flashes for 5 seconds and then disappears. The alarm
time is now set.
ETON SOUN 100 OPERATION MANUAL
5