Following Your Route - Garmin Zumo 500 Quick Reference Manual

Using the Menu Page
A
Displays satellite strength.
B Displays phone and headset
connection status.
Displays battery status.
C
D Touch to find a destination.
E
Touch to view the map.
F
Touch to open the Phone menu
(when connected to a mobile phone with
Bluetooth wireless technology).
®
G
Touch to view traffic incidents
(requires antenna or receiver and
subscription).

Following Your Route

Touch to zoom the
map in and out.
Touch to open the
Menu page.
Touch to open the Trip
Information page.
Using Traffic Features
Using an optional FM TMC traffic receiver or an XM smart antenna, you can
receive traffic data on your zūmo. On the map, touch
about a traffic delay on your current route. Touch
For more information about traffic and subscriptions, go to
www.garmin.com/traffic.
Using the Fuel Gauge
1. On the Map page, touch Speed to
open the Trip Information page.
2. Touch Reset > Miles/Kilometers
Per Tank.
3. Enter amount, and touch Done.
4. A message appears when
you have 30 miles (~48.3 km)
remaining. Touch OK.
5. Touch to search for a nearby
fuel station.
6. To reset, go to the Trip
Information page, and touch
the gauge > Yes.
Using Hands-Free Features
Bluetooth wireless technology
establishes a wireless link between
devices, such as a mobile phone,
wireless headset, and the zūmo.
To pair using the zūmo settings:
1. Confirm that the device is
compatible with your zūmo
(www.garmin.com/bluetooth).
2. On the zūmo's Menu page, touch
> Bluetooth.
3. Touch the Add/Change button
next to Connect
Connect Headset.
Phone or
A B
D
F G
H
Touch to view XM weather and
radio tuner (requires antenna and
subscription).
I Touch to open the Media Player.
J
Touch to adjust the settings.
or
Avoid to avoid the traffic delay.
Locking Your zūmo
1. On the Menu page, touch
System > Garmin
Lock.
2. Touch OK, and enter a four-digit
PIN.
3. Re-enter your four-digit PIN.
4. Touch OK.
5. Drive to a security location, and
touch Set.
6. Each time you turn on the zūmo,
enter the four-digit PIN or drive to
the security location.
4. Enable your device's Bluetooth
component, and enable Find Me/
Discoverable/Visible mode. These
settings might be in a Bluetooth or
Connections menu.
5. Touch OK on the zūmo.
6. Select your device, and touch OK.
7. If necessary, enter the zūmo's
Bluetooth PIN (1234) in your
phone.
8. The next time you turn on your
zūmo, it automatically tries to pair
with the last device with which it
was connected.
C
H I J
Touch to preview
turns in the route.
Touch to save your
current location.
Touch to open the
Next Turn page.
to view details
E
>