Interface' Tab - Garmin StreetPilot III Owner's Manual & Reference

Portable gps with auto-routing and voice

Hide thumbs Also See for StreetPilot III:

Table of Contents

'Interface' Tab

The 'Interface' ﬁ le tab provides the following input/output format settings:

• Garmin: the proprietary format used to exchange waypoint, route, track log data with a PC. The

format used for database updates and to save optional MapSource CD-ROM data to an installed

data cartridge (also optional).

• Garmin DGPS: the proprietary format used to receive differential corrections from a Garmin

DGPS beacon receiver and automatically scan/tune beacon frequencies.

• NMEA: supports the input/output of standard NMEA 0183 version 2.30 data.

• Text Out: supports a standardized, ﬁ xed-column ASCII output with data for position, track,

speed, etc.

• RTCM In: allows Differential GPS (DGPS) input using a standard RTCM SC-104 format, without

any output capabilities.

• RTCM In/NMEA Out: allows DGPS input using a standard RTCM format and also provides

NMEA 0183 version 2.30 output.

• RTCM In/Text Out: allows DGPS input using a standard RTCM format and also provides a

standardized, ﬁ xed-column ASCII output with data for position, track, speed, etc.

• None: provides no interfacing capabilities.

See page 55 for more information on wiring and interfacing.

Reference

System Setup

The StreetPilot III allows you to choose from a number of

input/output formats.

Table of Contents