Step 3; Step 4; Assembly Completion - modway EEI-2933 Quick Start Manual

EEI–2933
CHAIR

STEP 3:

Carefully turn over the assembled Chair Back (1), Chair Seat (2), Left Frame (3) and Right Frame (4).
Insert 2 pieces of Bolt (A) into the pre-drilled holes on Chair Back (1) through the top pre-drilled holes on Left
Frame (3).
Insert 2 piece of Bolt (A) into the pre-drilled holes on Chair Seat (2) through the top pre-drilled holes on Left
Frame (3). Use Allen Wrench (B) to tighten Bolts (A) clockwise until secure.
Repeat the same steps for Right Frame (4).
A
B
Hardware & Tool required

STEP 4:

Carefully position the assembled chair to the desired location.
Put Back Cushion (5) and Seat Cushion (6) into the assembled chair as shown.
Customer Service 908-368-1025 www.modwayfurniture.com
1
A
A
3
5
Assembly is complete. Your chair is ready to be used now!
A
A
4
A
A
2
A
A
6
A
B
Ax8
Page 3 of 3
Bx1