Adding A Via Point; Using Fm Tmc Traffic; Using Hands-Free Features - Garmin Nuvi 710 Quick Start Manual

Adding a Via Point

1. With a route active, touch Menu on the
map, and touch Where
2. Search for the via point (extra stop).
3. Touch Go.
4. Touch Add as Via
before your destination.
TIP: To add more than one stop, edit
the current route. Touch
Routes.

Using FM TMC Traffic

The traffic receiver is included in some nüvi
710, 750T, 760, and 770 packages.
If the nüvi is connected to the FM TMC
traffic receiver, connected to vehicle power,
and you are in a coverage area, the nüvi can
receive traffic delay information. For more
information, visit www.garmin.com/traffic.
When calculating your route, the nüvi
examines the current traffic and automatically
optimizes the route for the shortest time.
You might still be routed through traffic if no
alternative roads exist. If a severe traffic delay
occurs on your route while you are navigating,
the nüvi automatically recalculates the route.
to.
Point to add this stop
Where to
The Map page displays
is traffic on your route. The number in the
icon represents the number of minutes the
traffic has added to your route, which has been
automatically calculated into the arrival time
shown on the map.
1. On the Map page, touch
2. Touch
>
3. Touch Avoid.
NoTe: You do not need to activate
the subscription included with your
FM traffic receiver (if it came with
one). The subscription activates
automatically after your nüvi acquires
satellite signals while receiving traffic
signals from the pay service provider.

Using Hands-Free Features

Bluetooth wireless technology is available in
nüvi 710, 760, and 770 only.
Hands-free phone features are available only if
your nüvi and your compatible mobile phone
have Bluetooth wireless technology. Not
all phones support all the hands-free phone
features the nüvi provides. To use the hands-
free features, you must pair your phone and
the nüvi.

or when there
or
to view traffic delays.
.