Adding A Via Point; Creating And Saving A Route; Editing A Route - Garmin Mobile PC Quick Start Manual

Adding a Via Point

You can add stops (via points) to your route. Garmin
Mobile PC gives you directions to the via point and
then to your final destination.
tip: If you want to add more than one via point to the
route, see editing a Route.
1. With a route active, click the direction bar at the top
of the map page.
2. Click Edit.
3. Click Add Start Point or Add End
on when you want to stop at your via point. Clicking
Add End Point will change your final destination to
a via point.
4. Search for your destination.
5. Click Go.
6. Click Yes to add the location as a via point on your
route. Click No to set the location as your new
destination.


Creating and Saving a Route

To create and save a route, from the Menu page click
tools
creating the route, click
To save an active route, from the Menu page click
tools

Editing a Route

You can edit a route to change the route name, add
additional via points, or reshape the route.
Point, depending
1.
2. Click a route, and click Edit.
3. Click a category to edit.
•
•
•
> Manage My Data
Done
> Manage My Data
Click Tools > Manage My
Rename—enables you to rename a saved route.
edit/Review points—add additional via points and
change the final destination of a route.
Route preference—change the route preference to
calculate by faster time or shorter distance.
Garmin Mobile PC
> Routes > new. After
to save the route.
> Routes > Save.
Data > Routes.
Quick Start Manual
™