Attaching
Attaching
the Depth Stake
Handle Assembly
1
2
Install the handle on the
Insert handle into the
depth stake. Install the depth
handle mounting bracket.
stake to the tine shield with
Install the hardware as
the hardware.
shown.
Attaching
Carton
Clutch Cable
Removal
4
5
Route the clutch cable
Shift the tiller into the
through the hole in the
Neutral (N) position and
upper handle and attach
use the handle to lift
to the clutch bail. Adjust
and pull the tiller off the
cable, if necessary. Refer to
shipping platform.
Operator's Manual.
Gas
7
Fill fuel tank to bottom of tank filler neck.
Use unleaded fuel (minimum 87 octane
with no more than 10% ethanol).
Do not mix gas/oil.
Do not use E15, E20 or E85.
Fuel older than 30 days old can cause
starting issues and may void warranty.
NOTE: Images shown are for references only. Your individual tiller may have different features than those shown. Please refer to operator's manual.
Read operator's manual and follow all Safety
Rules and instructions before operating this
equipment.
778-12237B
Attaching
Control Rod
A
B
3
Install the control rod
into the indicator bracket
(A) and the gear selector
handle (B) with the
hardware as shown.
Oil
6
You must ADD OIL before
operating tiller.
Slowly pour entire bottle of
oil provided into the oil fill
spout. Replace and tighten
dipstick.
Control Rod
Clutch
Bail
Gasoline
Filler Cap
General Setup
Engine
Oil Cap