Setting Alarms - Garmin GPSMAP 536 Owner's Manual

Configuring the Chartplotter
• device List—lists the NMEA 2000 devices on your network. If a
NMEA 2000 device has configuration options or settings, select
the device for a list of options.
• Label devices—allows you to name your engines and tanks so
that you can better identify their location on the boat.
To label engines as numbers:
From the Home screen, select
nMEA 2000 Setup > Label Devices
> Use numbers.
To label engines as names:
1. From the Home screen, select
nMEA 2000 Setup > Label Devices
> Label Type > Choose names.
2. Select the engine you want to name.
3. Select the location of the engine:
Starboard (S), Fore (F), or
4. Select the label you want to use for the engine.
To label tanks as numbers:
1. From the Home screen, select
nMEA 2000 Setup > Label Devices
2. Select the type of tank you want to label.
3. Select Use numbers.
52
Configure > Communications
> Change Engine Labels
Configure Communications
>
> Change Engine Labels
Port (P), Center (C),
Aft (A).
Configure > Communications
> Change Tank Labels.
To label tanks as names:
1. From the Home screen, select
nMEA 2000 Setup
2. Select the type of tank you want to label.
Choose names.
3. Select
4. Select a tank.
5. Select the location of the tank:
>
(S), Fore (F), or Aft
6. Select the label you want to use for the tank.

Setting Alarms

>
You can set the unit to sound an audible alarm when certain
conditions are met. By default, all alarms are turned off.
To set an alarm:
1. From the Home screen, select
2. Select an alarm category.
3. Select an alarm.
4. Select On to turn on the alarm.
>
5. Specify alarm information.
Configure > Communications
> Label Devices > Change Tank
Port (P), Center (C),
(A).
Configure > Alarms.
GPSMAP 400/500 Series Owner's Manual
>
Labels.
Starboard