Garmin GPSMAP 536 Owner's Manual page 44

Viewing Information
From the Home screen, select
Engine.
Fuel gauge
Fuel flow
Cycling Through Engine Gauge Screens
1. From the Home screen, select
Engine.
2. Select the left and right arrows on the
gauge screen to the next.

Information > Dashboard >
Information > Dashboard >
rocker to move from one
Customizing Engine Gauge Limits
To establish the upper and lower limits of a gauge and the range
of desired standard operation, you can configure up to four values
for the engine gauge. When a value exceeds the range of standard
operation, the gauge face or bar becomes red.
Setting Description
Scale This value is less than the rated minimum, and it represents
minimum the lower limit of the gauge. This setting is not available on all
gauges.
Scale This value is greater than the rated maximum, and it represents
maximum the upper limit of the gauge. This setting is not available on all
gauges.
Rated Represents the minimum value of the standard operating range.
minimum
Rated Represents the maximum value of the standard operating
maximum range.
1. From the Home screen, select
Engine MEnU Gauge Setup
> >
2. Select a gauge.
3. Select Gauge Limits > Custom.
4. Select the gauge limit you want to set (Scale Min, Scale Max,
rated Min, or rated Max).
nOTE: Some of these options may not be available for all
gauges.
Information > Dashboard
Set Gauge Limits.
>
GPSMAP 400/500 Series Owner's Manual
>