Getting Satellite Signals - Garmin GPSMAP 378 Owner's Manual

Chartplotting receiver
Hide thumbs Also See for GPSMAP 378:
Table of Contents

Advertisement

G
S
>
G
S
ETTING
TARTED
ETTING
ATELLITE

Getting Satellite Signals

After you turn on the GPSMAP 378/478, the unit automatically
begins searching for satellites. The GPS page appears while the unit
is gathering satellite signals and acquiring a fix, which should take
only a few minutes. While the GPSMAP 378/478 is getting satellite
signals, the GPS page shows the status as "Acquiring Satellites."
It might take a few minutes to acquire satellites and display your
current location on the map. To get signals more quickly, be sure the
antenna is raised to the up position shown in the image on page 1.
NOTE: While acquiring satellites, the Map Page may display
the wrong location, such as China. This does not mean your unit
has the wrong data loaded; it means you need to wait a few more
minutes to acquire satellites and find your current location.
4
S
IGNALS
GPS Tab
Viewing GPS Status with the GPS Tab
The GPS tab on the Main Menu provides a visual reference of
satellite acquisition, receiver status, and accuracy. The sky view and
signal strength bars give an indication of what satellites are visible
to the receiver and whether they are being tracked.
As the receiver locks onto satellites, a signal strength bar appears
for each satellite in view, with the appropriate satellite number
underneath each bar. The numbers below each bar represent the
particular satellite that is being received. Numbers above 33 indicate
WAAS satellites.
The sky view shows a birds-eye view of the position of each satellite
relative to the receiver's last known position. The outer circle
represents the horizon (north up), the inner circle represents 45º
above the horizon, and the center point represents a position directly
overhead. You can also set the sky view to a Track Up configuration,
causing the top of the sky view to align along your current track
heading. Press MENU to change the configuration of the sky view.
A power source indicator shows the unit is operating off battery
power (
), that the unit is charging (
external power source is in use (
), or that an
).
GPSMAP 378/478 Owner's Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gpsmap 478

Table of Contents