Download Print this page

Motorola Symbol IP54 Cleaning Instructions page 2

Advertisement

Display
The display can be wiped down with the alcohol wipe indicated above, but care should be taken not
to allow any pooling of liquid around the edges of the display. Immediately dry the display with a soft,
non-abrasive cloth to prevent streaking.
Scanner Exit Window
Wipe the scanner exit window periodically with a lens tissue or other material suitable for cleaning
optical material such as eyeglasses.
Connector
1- Remove the main battery from mobile computer. Refer to the devices' User Guide for
instructions.
2- Close battery door.
3- Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol.
4- Insert the cotton portion of the cotton tipped applicator inside the connector on the bottom of
the mobile computer as shown below. Ensure the tip of the cotton applicator touches the back
of the connector. Do not leave any cotton residue inside the connector.
5- Twist the cotton tipped applicator and slowly move it back-and-forth from one side of the
connector to the other. Repeat at least three times then remove cotton tipped applicator from
the connector.
6- Use the cotton tipped applicator dipped in alcohol to remove any grease and dirt near the
connector area.
7- Use a dry cotton tipped applicator and repeat steps 3 through 5.
One Symbol Plaza, Holtsville, NY 11742-1300 • 1.631.738.2400 • www.symbol.com

Advertisement

loading