Samsung AC009BNLDCH Service Manual page 76

No Parts
11 Fan & Motor
12 Evaporator
Samsung Electronics
Procedure
1) Turn the hexangular nut attached to
the top of the Fan counterclockwise to
remove it. Take the Fan out of the Motor.
2) Turn the three hexangular nuts on the
Motor counterclockwise to remove the
nuts. Take the Motor Wires attached
to these three locations out with your
hands prior to removing the Motor.
1) Remove the screws of the Steel Holder
Evaps that are used to fix the Heat
Exchanger, and then remove it.
(Use +Screw Driver)
2) Remove the 2 fixing screws of the
Partition Evap at the Heat Exchanger's
In/Out Pipe.
(Use +Screw Driver)
Disassembly and Reassembly
Remark
3-33