Advertisement
Steering Wheel
Jam Nut
A
A
B
Adjusting Bolt
4.
Pull out the whole track.
When removing or installing the
tracks, be careful not to get your
fingers caught between the track
and pulley.
4.
5. After replacing the track, reassemble the
machine in reverse order
Engine Maintenance
Refer to the Engine Manual included in
your unit
for the information on engine
maintenance. Your engine manual provides
detailed information and a maintenance
schedule for performing the tasks.
36087UK00M100-出货版_更新回收处理标志.indd 21
Steering Wheel Axle
B
Wood Chipper Maintenance
Maintaining your chipper will ensure long life
to the machine and its components.
Preventive Maintenance
1. Turn off the engine. The engine must be
cool.
2. Keep the engine's throttle lever in its SLOW
position and remove the spark plug wire
from the spark plug and secure.
3. Inspect the general condition of the chipper.
Check for loose screws, misalignment or
binding of moving parts, cracked or broken
parts, and any other condition that may
affect its safe operation.
4. Remove all debris from the chipper with a
soft brush, vacuum, or compressed air. Then
use a premium quality lightweight machine
oil to lubricate all moving parts.
5. Replace the spark plug wire.
Never use a pressure washer to
clean your chipper. Water can
penetrate tight areas of the unit and
cause damage to spindles, pulleys,
bearings, or the engine .
Shut down the engine, wait for all
moving parts to come to a complete
stop, remove the spark plug wire,
and then wait five minutes before
performing maintenance on the
chipper.
Regular Maintenance Checklist
The service intervals shown are the maximum
under normal operating conditions. Increase
frequencies under extremely dirty or dusty
conditions.
WOOD CHIPPER
2019/10/22 16:18:23
GB
21
Advertisement
