Garmin GPS II Plus Owner's Manual & Reference page 69

Zooming and Panning (cont.)
As you begin to move the map, a crosshair appears (Fig. 63a). This crosshair will
serve as a target marker for the map. The distance and bearing to a destination will be
replaced by the distance and bearing from your present position to the target crosshair.
Fig. 63a
When you pan around the map, you'll notice the target crosshair will "snap to' on-
screen waypoints and highlight the waypoint name (Fig. 63b). Once a waypoint name
is highlighted, you can either review its waypoint definition page (Fig. 63c) or way-
point display options, or execute a GOTO function right from the Map Page (Fig. 63d).
Fig. 63b
Fig. 63c
Fig. 63d
63