To Rename The Waypoint; To Change The Waypoint Symbol - Garmin GPS II Plus Owner's Manual & Reference

To rename the waypoint:

1. Use the keypad to highlight the name field, and press ENTER.
2. Enter the waypoint name 'HOME' (Fig. 13a), and press ENTER. (See p. 6 for data entry.)
The 'waypoint symbol' field will become highlighted.
Each waypoint may also be assigned a custom waypoint symbol for easy way-
point recognition on the map page.

To change the waypoint symbol:

1. Highlight the waypoint symbol field (Fig. 13b), and press ENTER.
2. Select the house symbol, and press ENTER.
3. Move the cursor to the 'DONE?' prompt, and press ENTER.
4. Press ENTER to confirm the 'SAVE?' prompt.
The mark position page will be replaced by the Position Page (the page dis-
played before pressing MARK). The 'HOME' waypoint is now stored in the GPS II
memory.
Fig. 13a
+
' s
Fig. 13b
13