Garmin GPS II Owner's Manual page 87

Navigation Simulator
The GPS II's simulator mode lets you practice all aspects of its operation without
active satellite acquisition. You can plan and practice trips, enter new waypoints and
routes, and save them for use during normal operation. The simulator is activated
from the system setup page, with speed and heading controlled from the position,
compass or highway pages.
To activate the simulator:
1. From the menu page, highlight 'SYSTEMSETUP', and press ENTER.
2. Highlight the 'mode' field, and press ENTER.
3. Select 'Simulator?' (Fig. 81a), and press ENTER.
Once the simulator mode has been activated, use the position, compass, or high-
way page to set your speed and track. You may also enter a new position if you
desire (only from the position page).
To enter a track, speed, and position:
1. Highlight the 'track' field, and press ENTER.
2. Enter a track heading (Fig. 81b), and press ENTER.
REFERENCE
Fig. 81a
Fig. 81b
81